An array of functionalised membrane-type surface stress sensors (MSS) distinguishes cancer patients from healthy people through a signature response to breath samples.
Story content courtesy of MANA, the International Center for Materials Nanoarchitectonics at NIMS, Japan
A collaboration of researchers in Switzerland and Japan has developed portable cancer detection units for non-invasive diagnosis. “We created an artificial nose that is sensitive enough to diagnose head and neck cancer through analysis of the breath,” the researchers concluded in a recent report on their work.
The sensor design originates from conventional piezoresistive cantilever devices. Chemical layers coated on cantilevers absorb specific compounds and cause deflection of the cantilevers. These deflections can be measured through the change in electrical resistance at piezoresistors. However, these piezoresistive cantilever-type sensors have suffered from limited sensitivity. Recently, comprehensive structural optimization has led to a membrane-type surface stress sensor (MSS), achieving a significant improvement in sensitivity and stability. The MSS is composed of a thin silicon membrane (typically 2.5 μm thick and 500 μm in diameter) suspended by four piezoresistive beams attached to the circumference.
Frederic Loizeau at the Ecole Polytechnique Federale de Lausanne, Hans Peter Lang at the University of Basel in Switzerland, Genki Yoshikawa at the National Institute of Materials Science in Japan and their colleagues fabricated an array of MSS and coated them with different polymers to absorb various chemical compounds in breath samples. Reporting at the 26th IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2013), the researchers presented that MSS could distinguish, in a double blind trial, the breath of four cancer patients from four healthy people.
Subscribe to our mailing list, and we'll keep you posted of the latest developments.